DC53 Cold Work Tool Steel
DC53 is an advanced cold work tool steel developed from the SKD11 steel family. It offers an excellent combination of high hardness, wear resistance, and toughness, along with good machinability and grindability
Available Form
Round Bar
Custom Diameter & Length
Flat Bar
Custom Thickness, Width & Length
Square Bar
Custom Width & Length
Steel Plate
Custom Thickness, Width & Length
Steel Grade Comparison
| W-Nr | EN | AISI | JIS |
| – | – | – | DC53 |
Chemical Composition(wt%)
| C | Si | P | S | Mn | Cr | Mo | V |
| 0.90~1.10 | 0.80~1.20 | ≤0.025 | ≤0.025 | 0.20~0.50 | 7.80~8.50 | 1.80~2.20 | 0.20~0.40 |
Physical Properties
Density:7.87 g/cm³
Modulus of Elasticity: 207 GPa
Thermal Conductivity: 17.8 W/(m.K)
| Temperature | 20-100°C | 2-200°C | 2-300°C | 2-400°C |
| Coefficient of Thermal Expansion (×10-6 /K) | 10.8 | 11.6 | 12.2 | 12.8 |
Heat Treatment Process
Hardening: Heat the steel evenly to 1020-1040°C until the whole section reaches temperature. Then quench in oil to cool.
Annealing: Heat the steel to 830-880°C, hold it well at temperature, and then let it cool slowly inside the furnace.
Tempering: 180–200°C for low-temperature tempering or 500–550°C for high-temperature tempering.
High-temperature tempering at approximately 520–530°C can achieve a hardness of around 62–63 HRC.
Application Fields
Cutting tools, stamping, woodworking, drawing, deep drawing and pressing tools, cold working rolls, measuring tools.
Disclaimer: the information and data presented herein are typical values for reference and are not intended as warranties to readers.






